Setting up a Roku player is simple, with just a couple of things to determine beforehand.
The instructions below reflect most Roku players, with the following exceptions:
- Roku Streaming Stick (Roku Ready version) model 3400 and 3420
- Roku Streaming Stick (HDMI version) model 3500
- Roku TV (all manufacturers)
To find your model number on current Roku players, look at the bottom label. On legacy devices, the label may be in the rear. You can also check the model number from the software: from the Home Screen go to Settings>System>About.
Step 1: Determine which audio/video connection to use:
Below are the common audio and video connection types available on most television sets. Which are available on your TV?
HDMI, if available, is recommended. A single HDMI cable can carry both video and audio signals. It supports up to 1080p HD video playback on Roku players that are 1080p compatible. HDMI cables are sold separately at the accessory store here. Click on Cables at the top.
Component supports up to 720p HD. A separate audio connection is required with component. NOTE: Not all Roku players have component connections. Component cables are sold separately at the accessory store here. Click on Cables at the top.
Finally, composite supports standard definition only. It requires the use of an analog (RCA) audio connection. A combination composite and analog audio cable is included with every Roku player.
Step 2: Determine which networking type to use:
Will you be using wired or wireless networking to connect you Roku player to your Internet connection?
- Wireless – This is the most popular way to connect a Roku player. Make sure you have the appropriate wireless network name (SSID) and your wireless security password, if you use one.
- Wired – You will need a standard Ethernet cable (not included).
Step 3: Connect to your TV
HDMI – Insert one end of the HDMI cable into an HMDI-IN port of your TV. Insert the other end of the HDMI cable into the HDMI port on back of your the Roku player. Click here for more information about HDMI cables.
Component – Insert the red/blue/green component connectors from one end of the cable into the corresponding component-in ports on your TV. Insert the connectors on other end of the cable into the corresponding color component ports on back of your the Roku player. Note: Component is for video only. You will need to connect the red and white RCA connectors on an A/V cable to the analog audio ports of your TV and Roku player for audio. You may also need a special component cable if you have the Roku XDS model. Click here to order a component cable for your Roku XDS.
Composite – Insert the yellow/white/red composite video and analog audio connections from one end of the cable into the corresponding A/V-in ports on your TV. Insert the connectors on the other end of the cable into the corresponding ports on the back of your Roku player. Note: Do not connect your Roku player through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on your television.
Step 4: Connect to your network
Wired – If you will be using a wired connection, connect one end of an Ethernet network cable to the Ethernet port on back of the Roku player, and the other end to an available Ethernet port on your router.
Wireless – If you will be using a wireless network connection, make sure you know your wireless network name (SSID) and the your wireless security password, if you use one.
Step 5. Turn it on and get started!
Connect the power adapter into the Roku player and the wall outlet. The Roku player will boot up and display the following sequence of screens:
- Roku – starting, please wait.
- Roku – launching home screen.
- Welcome to the Roku player.
- Press “OK” to begin.
- Settings - you will be given 2 options to connect the player to your router:
- Wired – Use an Ethernet cable (not included) to connect your player to your router.
- Click the “wired” option to continue.
- Wireless – on the subsequent screens, you will select your wireless network name and enter security password for your wireless network.
- Click the “wireless” option to continue.
- Upon successful network connection, the Roku player will then automatically download and install the latest software. After the software update, the player will reboot.
Step 6: Complete the guided setup
Just follow the on-screen instructions.
- After the restart, you will be asked to select your time zone.
- Change to your correct time zone then select “done.”
- The next screen will display a unique code to link your Roku player.
- Open a browser session on a PC or Mac.
- Go to www.roku.com/link.
- Enter the code displayed by your Roku player on your TV.
- Log into your Roku account or create a new Roku account.
- Follow all steps, including setting a payment method and selecting your initial channel lineup, to complete the linking process.
Once linked, your Roku player will refresh to a congratulations screen and be ready for use.