You can turn off your TV from your Roku Home screen using the "TV Off" shortcut. This guide explains how to set it up and solve issues you may experience.
Set up
- Plug your Roku player into an HDMI port on your TV. If your player uses a cable, make sure you connect it to your TV with a High-Speed HDMI cable.
- Turn on CEC on your Roku player: Press Home, then go to Settings > System > Control other devices (CEC). Turn on One-Touch Play and TV Power. These settings allow your Roku player to turn off your TV and adjust volume, including when you use the Roku Mobile App.
- Turn on CEC on your TV. CEC names vary by brand and may be in System or Advanced Settings. If you do not see a setting labeled CEC, see this article for further help. You can also look up your TV model online or check the manual. Contact the manufacturer for additional assistance.
How to use the TV Off shortcut
- Press Home on your Roku remote and navigate using the directional pad
- Scroll to the bottom to find the TV Off tile.
- Select it to turn off your TV.
Troubleshooting
If the TV Off shortcut does not work, check the following:
- You are using a High-Speed HDMI cable
- Your Roku player is connected directly to your TV (bypass soundbars/receivers to test)
- CEC is turned on in Roku settings
- "One-Touch Play," "TV Power," and "TV Volume" are enabled in the Control Other Devices (CEC) menu
- CEC is turned on in your TV’s settings
If you cannot find the TV Off tile:
- Press Home
- Go to Settings
- Select Home Screen > Shortcuts
- Turn on the TV Off shortcut
Using your Roku player to control TV power and volume
You can control your TV two ways:
Using the Roku Voice Remote
- Press Home
button on Roku remote on your Roku remote - Scroll and select Settings
- Select Devices > Remotes
- Proceed through the "Control TV" setup flow
- Press Power to turn the TV off
- Press volume buttons to change volume. This method controls the TV directly through the Roku remote.
Using the Roku Mobile App:
- Press Home button on Roku remote on your Roku remote
- Scroll and select Settings
- Select System
- Select TV Power and TV Volume
- Tap the power button in the Roku Mobile App to turn the TV off
- Use the volume controls in the app to change the TV volume. This method sends commands through your Roku player using HDMI-CEC, not infrared.
Turning on your TV with your Roku player
Most TVs turn on and switch to the Roku player input when you press any button on the Roku remote (except volume or mute) if One-Touch Play is on and CEC is enabled on the TV. In order for the mobile app to power on the TV, the Roku player needs to be powered on. The best way to guarantee this is to plug your player directly into the wall.
Last updated at 3/3/2026 1:41:09 AM
Was this article helpful?
Related articles
Need more help?
