Your Roku® Home Monitoring System PIN is used to turn off an active entry delay or alarm. By default your PIN is not required to change between Home and Away mode. Your PIN was set during the initial setup of your Roku Home Monitoring System SE. This article provides instructions on changing your PIN in the Roku Smart Home mobile app.
How to change your PIN
Use the following instructions to change your PIN in the Roku Smart Home Mobile app.
- In the navigation bar, tap Monitoring
- Tap Home monitoring settings
- Tap PIN
- Tap Update PIN
- Tap Update
- Type your new 4 digit PIN and then tap Update
You will receive a confirmation message that your PIN has been updated.
Note: You can only have one home monitoring PIN.
Last updated at 6/26/2026 8:24:02 PM
Was this article helpful?
Related articles
Turn monitoring alarm modes on and off
You can change home monitoring modes in the Roku ® Smart Home mobile app or on your Roku keypad to turn your monitoring alarm modes on
What to do during an alarm
When an intrusion is detected by the sensor on your , an alarm will be triggered.
Set entry and exit delays
This article provides information about entry and exit delays and instructions on how to change entry and exit delay settings in the
Need more help?
